Generators for electrical prospecting TLT-5000
Generators are an instruments for geophysical prospecting by means IP, Resistivity and Excitation-at-the-mass methods.These generators produce alternate polarity impulses to transmit them into grounded electrical supply line ÀÂ. The current forms in the line ÀÂ alternate polarity impulses with pauses between them (mode RPI-2) or without pauses (mode RPI-1). A value of the current can be automatically stabilized.Generators provide these conditions when the total resistance of the supply line AB (consisting of the resistance wire and grounding resistances lines A and B) in the range 25 - 1000 Om.
Commutation mode current and adaptation to changing load resistance: automatic.
The current in the line AB is reflected in the digital display. Operating current values from 0.3 to 10 A. The current value can be stabilized.
Electric generators have protection on the output (short circuit, open circuit) and have the opportunity to work at any load (capacitance, inductance, resistance, in any combination).
|Frequency conversion||10 kHz|
|Output voltage||50 - 550 V|
|Output current||0.3 – 10 A|
|Output power up to||5000 W|
|AC frequency||0.038 – 4.88 Hz|
|Alternate polarity pulse duration||100 ms – 13.1 s|
|Maintain the accuracy of the frequency and duration of pulses||+/- 3*10-8|
|Precision current regulation is not worse||+/- 2 %|
|Temperature interval :|
Source power circuit is a gasoline unit capacity of not less than 6 kW three-phase electric current voltage 350 - 450 V. Supplied on request.Time-frequency range can be adjusted according to customer requirements.
Delivery package includes:
- Synchronisation cable;
- Power supply cable;
- Ballast resistance;
- Packing container;
- User's manual;
- Reserve tools and accessories